ใช้โปรแกรม Infinity โดย ผ่าน super doctor Ⅲ read แล้ว errorมีวิธีแก้ ครับ

ตัวอย่าง


driver อันเก่า

Are you sure that detected eeprom address is correct ?
autodetected eeprom/ffs address[00E00000] confirmed by user
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
reading [flash[E553_K4SMCHARAB_E553_GPRS_MT6226_S01.01_1.BIN]]...
warning: wrong cs at 0x0000C000, retry...
warning: wrong cs at 0x0000C000, retry...
warning: wrong cs at 0x0000C000, retry...
warning: wrong cs at 0x0000C000, retry...
warning: wrong cs at 0x0000C000, retry...
warning: wrong cs at 0x0000C000, retry...
warning: wrong cs at 0x0000C000, retry...
warning: wrong cs at 0x0000C000, retry...
warning: wrong cs at 0x0000C000, rety...

ลง driver อันใหม่แล้วผลที่ได้

Wait...
Device: Autodetect 6205-6227 NOR
Done
COM5 [Serial2] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
chip: 0031:F435:1438
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.86BD9C34.[MTK26_05C_DS502ARAB_PCB01_GPRS_MT6226_S01.MAUI_05C _W06_16.BIN_4F4F1067].rpl
New firmware detected:
MTK26_05C_DS502ARAB_PCB01_GPRS_MT6226_S01.MAUI_05C _W06_16.BIN

- make "Repair security area" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: 86BD9C34
identification#1 protocol ver: 04
ver. sw1: MTK26_05C_DS502ARAB_PCB01_GPRS_MT6226_S01.MAUI_05C _W06_16.BIN
ver. sw2: MAUI.05C.W06.16
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 98004900000002:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
reading [flash[MTK26_05C_DS502ARAB_PCB01_GPRS_MT6226_S01.MAUI_05C _W06_16.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_flash[MTK26_05C_DS502ARAB_PCB01_GPRS_MT6226_S01.MAUI_05C _W06_16.BIN]_20080113-053255.B0M.bin
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _86BD9C34_MTK26_05C_DS502ARAB_PCB01_GPRS_MT6226_S0 1.MAUI_05C_W06_16.BIN_4F4F1067_20080113-053318.B0X.bin
Finished, time used: 464 sec
Remove/Install battery now !
990900.gif




super doctor Ⅲ จะใช้ chip PL-2303 ครับ ให้ไปโหลดไดร์เวอร์ เวอร์ชั่นล่าสุดจะแก้ปัญหา read error ได้ครับ

หรือจะนำไปใช้กับ กล่องอื่นก็ได้ครับ ที่ใช้chip PL-2303 เช่น ve ครับ



ไปโหลดที่นี้ครับ

http://www.prolific.com.tw/support/files/%5CIO%20Cable%5CPL-2303HX%5CDrivers%5CGeneric%5CPL2303_XP2KME98Driver_Setup.zip